AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Fluke Networks DSP-FTK LS-1310/1550 SM MM Test Kit – AAATesters.com

On Sale! Fluke Networks DSP-FTK LS-1310/1550 SM MM Test Kit – AAATesters.com

Click for Product Info and Updated Pricing

Fluke Network DSP-FTK LS-1310/1550 Fiber Optic Source

FLUKE DSP-FTK Singlemode 1310/1550nm Multimode 850/1300nm Fiber Test Kit

For Use With DSP-4000 / DSP-4100 / DSP-4300 Digital Cable Analyzers
(Cable Analyzers Not Included In Sale)

DSP-FOM Power Meter:
– 850nm
– 1300nm
– 1310nm
– 1550nm

FOS 850/1300 Fiber Source:
– 850nm
– 1300nm

Includes Hard Carrying Case & Accessories As Listed

DSP FTK DSPFTK LS 1310 1550

Fluke Networks DSP-FTK DSPFTK SM MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

Product Capabilities
Fluke Networks Fiber Test Kit measures power or power loss in optical fiber links used in premise wiring and LAN networks. The DSP-FTK is compatible with the DSP Series cable testers, OneTouch™ Network Assistant and Enterprise LANMeter® test tools.

Verify Fiber Optic Performance
The Fiber Optic Test Kit includes an optical power meter (DSP-FOM), combination 850/1300 nm LED power source (DSP-FOS), patch cables, adapters and hard carrying case.

Simplifies Fiber Testing
The Fiber Optic Meter (DSP-FOM) interfaces with the DSP Series cable testers, OneTouch Network™ Assistant, or Enterprise LANMeter® using a short twisted-pair patch cable which plugs into the 8-pin modular jack of these instruments. Just select the wavelength to be measured with the optical meter’s slide switch (850 nm, 1300 nm, and 1550 nm), and the test tool will input, display, and store the measurement.

Just plug in the modular Fiber Test Adapter (DSP-FTA410S) adapter to the DSP-4000 CableAnalyzer and you’re ready to test fiber for bad connections, bad splices, broken fibers, and loss of power – from one end of the fiber. With talk mode, you can easily communicate with your partner.

Allows a Choice of Test Options
Use the DSP-FOM Fiber Optic Power Meter to measure optical power, in dBm or mW. You can also measure optical power loss (expressed in dB). The power loss measurement (or attenuation) compares the measured light energy at the end of the link (output) to the reference level at the input (the light source). This loss measurement result delivers a true optical loss measurement for the link by subtracting the loss associated with the fiber optic patch cables. The operator can specify the Pass/Fail limit for loss and also the direction (A-B or B-A) of the measurement.

Generates Complete Reports through a PC or Directly to a Printer
You can record and store any combination of copper or fiber optic Autotest reports with the DSP Series cable testers. Each test report can be assigned a unique, user-definable label, and can be downloaded to a PC or printed directly from the cable tester to a serial printer. Test reports contain wavelength, measured loss, loss limit, test direction and reference level. The fiber test results may be saved in the tester memory using a cable name of up to 27 characters long.

Easy to Learn and Use
The fiber test accessories complement the Fluke instruments with the same technological leadership and ease of use that has made Fluke an industry standard. The large, easy-to-read menus on the LCD display of the test tools prompt the operator through each step of a fiber link test.

Fluke Network DSP-FTK LS-1310/1550

Product Specifications
DSP-FOM Optical Power Meter
Calibrated Wavelengths: 850 nm, 1300 nm (used also for 1310 nm), and 1550 nm
Dynamic Range: +3 to -50 dBm
Measurement Accuracy  ±0.25 dB at -10.0 dBm and 25°C
Display Resolution: 0.01 dB (0.001 µW)
Detector Type: Germanium
Optical Adapter        ST
Operating Temperature  0° C to +40° C
Storage Temperature  -20° C to +70° C
Dimensions               4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm)
Weight:       5.0 oz (142g)
Battery Type                9V alkaline
Battery Life                90 hours typical

FOS-850/1300 Optical Source
Transmit Wavelengths  850 nm and 1300 nm
Power Output: -20 dBm
Source Type: LED
Optical Adapter: ST
Operating Temperature  0° C to +40° C
Storage Temperature  -20° C to +70° C
Dimensions: 4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm)
Weight: 5.0 oz (142g)
Battery Type: 9V alkaline
Battery Life: 24 hours typical
LS-1310/1550 Laser Source
Output wavelengths: 1310 nm or 1550 nm, switch selectable
Power output: -10 dBm, adjustable
Source type: Laser (Class I)
Optical adapter: Single Mode ST
Operating temperature: 0°C to +40°C
Storage temperature: -10°C to +60°C
Dimensions: 6.8 x 3 x 1.5 in (17.4 x 7.6 x 3.8 cm)
Weight: 9.4 oz. (266 g)
Battery type: 9V alkaline
Battery life: 16 hours typical

Condition: Refurbished
Warranty: 90 Day Exchange

Included   
Fluke DSP-FOM Fiber Optic Power Meter (BC# 18360)
Power Meter:
-850nm
-1300nm
-1310nm
-1550nm
ST Connector For Power Meter
Fluke FOS 850/1300 MultiMode Fiber Source (BC# 18361)
MM Source:
-850nm
-1300nm
(2) ST Connectors For Source
Fluke LS-1310/1550 SingleMode Laser Source (BC# 17978)
SM Source:
-1310nm
-1550nm
ST Connector For Source
Ethernet Cable
SM ST-ST Fiber Cable
Duplex MM ST-ST Fiber Cable
MM ST-ST Fiber Cable
(4) Fiber Optic Wipes
User Manual On CD-ROM
Hard Carrying Case

DSP-FTK LS-1310/1550

 


Fluke Networks DSP-FTK LS-1310/1550 Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List